全自動切斷機

新聞動態

聯系我們

濟南陸勤機械有限公司

聯系人:張經理

電 話: 0531-83831136

電 話:18654536782

地址:山東省濟南市章丘相公莊工業園

2020圓鋼切斷機在選擇的那時候常見問題

瀏覽量:?? 來源:www.axircle.com??作者:陸勤
數控圓鋼切斷機現階段,銷售市場上的自動式圓鋼切斷機商品有許多,因為中國生產制造自動式圓鋼切斷機的生產廠家有許多,絕大多數客戶在選購時常有疑惑,不清楚應當怎樣挑選自動式圓鋼切斷機.銷售市場上所市場銷售的自動式圓鋼切斷機品質有所不同,在選擇圓鋼切斷機的那時候,要留意以下內容:


At present, there are many products of automatic round steel cutters on the market, because there are many manufacturers of automatic round steel cutters in China. Most customers often have doubts about how to choose automatic round steel cutters. The quality of automatic round steel cutters sold on the market is different. At the time of choosing round steel cutters, Attention should be paid to the following:




1.查詢自動式圓鋼切斷機外殼電焊焊接是不是堅固,外型是不是干凈整潔,邊沿是不是有毛邊、表層是不是整平. 2.查詢自動式圓鋼切斷機主、普攻軸設備與聲卡機架聯接是不是堅固、旋轉靈不靈便;剎車踏板設備姿勢是不是靈便.自動式彈簧鋼切斷機


1. Query whether the shell of automatic round steel cutting machine is soldered, its appearance is clean and tidy, whether the edge is furred and the surface is flat. 2. Query whether the connection between the main part of automatic round steel cutting machine, the general tapping shaft equipment and the sound card frame is firm and inconvenient to rotate; Whether the position of brake pedal equipment is convenient. Automatic spring steel cutting machine




3.查驗滾刀有沒有裂縫,安裝是不是恰當,刀頭固定不動地腳螺栓是不是堅固. 4.查詢導輪設備與導軌滑塊安裝部位、相互配合空隙是不是合乎裝配圖規定. 5.查驗皮帶盤和傳動系統轉動位置的安全裝置是不是齊備、牢固.


3. Check whether the hob has cracks, whether the installation is appropriate, whether the knife head is fixed and the foot bolt is firm. 4. Check whether the installation position and the mating gap between the guide wheel equipment and the slider of the guide rail conform to the assembly drawing. 5. Check whether the safety device of the belt tray and the rotating position of the transmission system is complete and firm.




6.查詢普攻軸部件在工作中全過程中伸縮式是不是穩定、有沒有噪音. 7.查詢主動軸皮帶盤與主電動機皮帶盤安裝部位是不是合乎工程圖紙規定,三角皮帶型號規格、力矩力是不是符合規定規定.


6. Query whether the retractable type of shaft parts is stable and noisy in the whole process of work. 7. Query whether the installation parts of the driving shaft belt tray and the main motor belt tray conform to the requirements of Engineering drawings, and whether the type specifications of the triangular belt and the moment force conform to the requirements.




8.查詢自動式圓鋼切斷機各位置安裝是不是合乎工程圖紙規定,及其各種各樣安全標示是不是齊備,是不是固定不動在了顯眼的部位.


8. Inquire whether the installation of automatic round steel cutter conforms to the requirements of Engineering drawings, and whether all kinds of safety signs are complete and fixed in the conspicuous position.http://www.axircle.com/


国产a级特黄的片子_一区二区国产高清视频在线_成年免费a级毛片